Skip to content
Setcoin Group
Request access

See the tender coming.

Open tenders that fit your equipment today, and every bankable project that will need it before it tenders.

watcher · heading to tenderLive
$3.32Tmodeled equipment procurement78% of the $4.28tn Atlas pipeline
17,828projects in the modeled pipeline
45equipment categories, each with lead time and supply risk
47%of live projects have permit or grid consent
In 60 seconds

The tender you never saw.

Four in ten EU public tenders draw exactly one bid. Six agents follow the next one from first signal to first draft. You review it, and you submit it.

Single-bid share: European Court of Auditors, Special Report 28/2023, 2021 data. The tender in the film is illustrative.
Read the transcript

In Europe, four in ten public tenders draw exactly one bid. Somewhere, one of them was for the kit you make. You never saw it. So… what if you saw the next one coming? Scout has already found the next one. Fourteen months before it goes to tender. Reader goes through every page, and pulls out the requirements that decide the bid. Verifier checks the buyer. Permits, grid, funding… is this project really going ahead? Registrar gets you onto the buyer’s portal, long before the deadline. Drafter writes the first draft. You review it. You submit it. The agents never submit for you. And Watcher never stops looking. If a project stalls, you’ll know before you build for it. Same factory. Same team. This time, you saw it coming. See the tender coming.

Infrastructure OS for vendors

Data in. Engines score it. Agents do the work.

Live datasetsEU TED · 650SAM.gov · 7World Bank · 2317,828 projects88 public registersGrid queues · IEA
Proprietary enginesBankability IndexDemand modelTime-to-PowerVerifyTender reader
AI agentsScoutReaderDrafterRegistrarVerifierWatcher
Your businessBids ready to submitPipeline that movesNew buyers, inbound
680 open tenders scanned today
Six agents, one bid

Watch them work a tender.

agent · scoutrunning
    0
    tenders fit you

    Example run on a sample tender. Source counts are today’s. You review and submit; agents never submit for you.

    Try it on your own category

    Your pipeline in thirty seconds.

    Pick what you sell and where. Everything below is computed from the live Atlas — 15,421 pre-construction projects with a capex figure — through the same equipment model the paid product uses.

    —modeled demand for your category
    —projects that will buy it
    —of these projects have a permit or grid consent on record
    —lead time · supply risk

    When the orders come

    By project stage: awarded projects are buying now; tendering ones within about a year; pre-tender ones in one to three years (stage-based estimate).

      Who buys it

      Modeled demand for your category by the sector of the project.

      Where it is

      Top countries and US states by modeled demand in your selection.

      Can you deliver in time?

      Move the slider to your next free production slot. Delivery = slot + your lead time; projects need delivery roughly 18 months out when awarded, 30 when tendering and 48 when pre-tender (stage-based estimate).

      —of the demand in your selection you can still deliver to

      Where several sectors buy the same kit

      Regions where two or more sectors will tender your category: one framework agreement, several buyers.

      The largest projects in your selection

      Anonymised. Gates on record: P permit · G grid · O offtake · E EPC.

      SectorWhereSizeStageYour categoryGates
      See every named project, its developer and the tender date

      Vendor Intelligence names the projects behind these numbers, alerts you before each tender opens, and ranks them by bankability so your bid team works on the ones that will be built.

      Modeled, not filed: demand is each project's capex times the typical share of that equipment in its sector's bill of quantities. Lead times and supply risk from Setcoin's vendor screen. Figures update as the Atlas does.

      Customer acquisition cost

      The same orders, for less.

      Today
      —
      With Setcoin
      —
      Finding & qualifyingBid preparationSetcoin plan
      —cost of winning one customer
      • Scout replaces prospecting
      • Reader + Drafter cut bid hours
      • Bankability screens out dead projects
      • RFP Rooms bring buyers to you
      Your assumptions

      Your numbers and your estimates — not a promise. CAC = (sales & marketing + bid hours + plan) ÷ customers won.

      The Bankability filter

      Most of the pipeline never reaches you. That’s the point.

      Tracked0live projects
      Consent on record0permit or grid evidenced · 47%
      Heading to tender0consented, EPC open · 33%
      88 public registers, six regionsSame gates lenders useRe-scored every night
      Demand radar · 45 categories

      Where the spend is, and how long it takes to deliver.

      EquipmentDemand in viewDelivery from a tender placed now
      202720282029203020312032
      Live agent feeds

      What the agents are watching right now.

      scout · heading to tenderlive
        watcher · cancellation signals · USlive

          A withdrawal is public; whether equipment was already on order is not. Early signals to confirm with the developer or OEM.

          Get matched — create free accountNames, developers and sources unlock with Demand Forecast.
          From the vendor screen · 46 projects

          Who can build what the Atlas holds.

          20 equipment vendors and EPCs, ranked against this pipeline's modeled demand — filed backlog and capacity, not a press release. Aggregate fit only; named-project ties are the paid Vendor Intelligence product.

          See all 20 vendors →
          VendorPrimary categoryCapacity / backlogAtlas fit
          Caterpillar (incl. Solar Turbines)USGas reciprocating engine gensetsLarge reciprocating engine capacity going to ~3× 2024, turbines 2.5×; additions running 2–3 months ahead of plan34 proj. · $14bn
          EatonIEMV switchgearElectrical Americas backlog +33% y/y; Electrical Global +103%; electrical book-to-bill 1.2 (rolling 12m)46 proj. · $22.5bn
          VertivUSUPS and power conversion15 USD bn backlog (+109% y/y), Q4 2025 book-to-bill ~2.9×34 proj. · $21bn
          Siemens EnergyDELarge-frame gas turbines162 EUR bn group order backlog (Gas Services EUR 73bn incl. 69 GW firm gas turbines; Grid Technologies EUR 51bn)4 proj. · $9.7bn
          Schneider ElectricFRMV switchgearRecord backlog; 2–3 years visibility via customer forecasts (H1 2026)46 proj. · $22.5bn
          Applied MaterialsUSDepositionFiscal Q3 2026 revenue $9.12bn (+25%); China share down to 28%10 proj. · $27bn
          Trane TechnologiesIEChillers and heat rejection12.1 USD bn record backlog (+70% y/y); Americas applied bookings +130%46 proj. · $19.5bn
          Lam ResearchUSDepositionIndustry WFE ~low-$150bn in 2026, constrained by cleanroom capacity10 proj. · $27bn

          Procuring for a project at shovel-ready or later? Setcoin screens vendors against filed backlog and capacity, not marketing decks, and matches them to your bill of quantities.

          See the Vendor subscription
          Plans and prices

          Try everything free. Upgrade when it’s winning you work.

          The free account opens every feature — tenders, bid workspace, AI drafting, pipeline, alerts, readiness — so you can run a real bid end to end. Paid plans lift the limits that matter once it becomes part of how you sell.

          Setcoin for Vendors plans and limits, prices per year in euros
          Free€0no card neededRun a real bid end to end, with limits.Start free
          Registry listingFrom€2k/ yearBe found by the developers and lenders Setcoin works with.Start with Registry listing
          BidFrom€6k/ yearFor teams that bid every month, before they need the full forecast.Start with Bid
          RecommendedDemand ForecastFrom€18k/ year, first categoryEvery matched project, named, with a pipeline and bid workspace to work it.Start with Demand Forecast
          Tender-ReadyFrom€36k/ year per category groupIntroductions, unlimited AI drafting and help on every portal.Start with Tender-Ready
          Tenders and bids
          Open public tenders in your categories3 best fits a monthAllAllAllAll
          Bids in the workspace at once13UnlimitedUnlimitedUnlimited
          Tender documents read, facts filled in✓✓✓✓✓
          AI-drafted bid packs1 a year5 a year12 a year30 a yearUnlimited
          Exports for Ariba, Coupa, JAGGAERPrice sheetAll formatsAll formatsAll formatsAll formats
          RFP Rooms you’re invited to✓✓✓✓✓
          Listed for developer invitations—✓✓✓Priority
          Demand before the tender
          Matched projects5, anonymised10, anonymised25, namedAll, namedAll, named
          Projects in your pipeline31050UnlimitedUnlimited
          AlertsLatest 5Latest 20All + weekly digestAll + weekly digestAll + weekly digest
          CSV export of your matches———✓✓
          Access and team
          Readiness check, document library✓✓✓✓✓
          Introductions to procurement under NDA————✓
          Help registering on tender portals————✓
          Verify Snapshots included————4 a year
          Team seats123510

          Demand Forecast across categories

          Priced per equipment category. The second is 30% off, the third and later 50% off.

          From €18,000a year
          Cat. 1€18,000
          Extra AI bid pack: €150/ pack, on any plan
          Portal registration help: from €1.5k/ portal, included in Tender-Ready
          RFP Rooms: freeInvited vendors bid free on every plan. Developers and lenders run rooms free.

          Prices per year in euros. Tender-Ready is per category group; several regions or groups are quoted.

          Put six agents to work on your next tender.

          No card for the free plan. You decide what to bid; nothing is submitted for you.

          Vendors, OEMs & EPCs

          Questions vendors ask first

          What does Setcoin for Vendors show?

          Which projects will buy your equipment, when they are likely to tender, and where supply is tight — built from 17,828 projects on the public record, before the RFQ goes out.

          How is equipment demand estimated?

          Each sector's capital cost splits into known equipment shares (transformers, switchgear, turbines, storage, cooling and so on). Those shares are applied to every matching project's capex and stage, then summed by category, region and expected tender date.

          How much does it cost?

          The free account costs nothing and needs no card. A registry listing starts at €2k a year, the Bid plan at €6k, Demand Forecast at €18k a year for the first category, and Tender-Ready at €36k a year per category group. All prices are in euros.

          Can I offer my equipment on a lease?

          Yes. A lease turns a one-off sale into years of contracted revenue and lowers the buyer’s up-front capex. The Capital Map shows when a lease lifts the project’s equity return and which equipment financiers and lessors are active in your sector.

          Which regions are covered?

          The United States, Europe and the UK, Canada, Asia-Pacific, Latin America, and the Middle East and Africa — the same six regions as the Setcoin Atlas.